LP-F-6 Series
is designed to be ...
Effective Electrical Travel: 100mm, 150mm, 200mm, 250mm, 300mm
Rod End Shaft
Low Torque
○ LP-F-62: Rod End, Binder Connector
○ LP-F-63: Rod End, Insulated Wire
○ LP-F-65: Rod End, Insulated Wire, Dust&Drip Proof (IP54)
Have an evaluation (paid) sample request for this product or any questions about it? Please contact us.
Product Specifications
Electrical Specifications: LP-100F-62, -63, -65
Effective Electrical Travel: 100mm
Independent Linearity: ±0.3%FS (Special: ±0.1%)
Total Resistance: 1K, 2K, 5K, 10K Ω
Rated Dissipation: 2W
Output: Voltage Ratio (0~100%Vin)
Mechanical Specifications: LP-100F-62, -63, -65
Total Mechanical Travel: 145mm±1mm
Friction: 2N MAX.
Weight: Approx. 200g (LP-F-62,-63)/ Approx.400g (LP-F-65)
Environmental Specifications: LP-100F-62, -63, -65
Category Temp. Range: -40~+80℃
APPLICATION EXAMPLES
Race Car
Monitoring torsional and flexural of the body
Shield Machine
Hydraulic cylinder stroke
Injection Machine
Mold clamping stroke, Adjust the amount of liquid resin injection
DATA SHEET(PDF)/ CAD DATA (DXF)/ CONTACT
HANDLING INSTRUCTION
Miswiring may cause burnout of the resistive element.
To reduce sliding noise, add load resistance should be more than 100times and less than 1000times of total resistance.
Slight continuous vibration, such as dither, might cause a short lifetime of the sensor.